T: +84 (251) 368 0830 | Français English

Structures - Platforms

In a spirit of boilermaker handworker, Stolz Miras fabricates structures or customized equipment for all type of specific uses.

Structures - Platforms

Using stainless steel, steel or aluminium, our expertise meets the most demanding industries and the most particular requests.

Slide 1

Aeronautics
Mild steel - 320 kg
Structural supports. Design Stolz-Miras.
October 2020
Slide 2

Tire industry
Mild steel - 5,000 kg
Industrial Plateform: L 11.5 x W 3.5 x H 3.5 m
September 2020
Slide 3

Sugar process industry
Stainless steel 304L - 4,700 kg
Mixing Rotor: L 11.6 m x Ø 3.9 m
August 2020
Slide 4

Tire industry
Mild steel - 13,200 kg
Frame for conveyors
September 2020
Aéronautique

Hoppers

From storage, unloading to filling, we manufacture hoppers tailored to your needs.

Hoppers

Hoppers are essential elements for production sites due to the products they carry, the roughness of their surface, or the environment in which they are installed.

Knowing and considering all these constraints and their consequences, Stolz-Miras is fully committed to meet all of your requirements.

Slide 1

Agrochemicals
Stainless steel 304L - 2,900 kg
Hopper: L 3.6 x W 2.5 x H 3.5 m
November 2020
Slide 2

Cement industry
Mild steel - 400 kg
Hopper
June 2020
Slide 3

Food and Feed
Mild steel -1,500 kg
Hopper: L 5.8 m x Ø 2.3 m. Assembly before painting.
July 2020
Slide 4

Packaging process
Stainless steel 304L - 90 kg
Milling lower flange after welding. Roughness Ra < 1.6 µm.
December 2020
Slide 5

Food and Feed
Mild steel - 600 kg
Hopper
February 2019

Tanks

Tanks fabrication has been Stolz Miras primary know-how before the company diversified to a wider range of mechanical boiler works.​

Tanks

Since 1998, we have gained a deep experience in the manufacturing tanks, from the simplest to the most specific, from atmospheric to Certified pressured tank.

We cover also all capacities (from 1 to 180,000 liters).

We manufacture notably on behalf of the pharmaceutical, agro-food, nuclear power industries.

Slide 1

Industrial process
Stainless steel 304L - 630 kg
Inside surface mirro-polish. Outside surface glassblasted.
June 2020
Slide 2

Perfum industry
Stainless steel 316L - 1,350 kg
Inside roughness Ra < 0.8 µm. Design Stolz-Miras.
January 2018
Slide 3

Water treatment
Stainless steel 316L - 1,200 kg
Inside roughness Ra < 0.8 µm. Installation on site.
March 2017
Slide 4

Food and Feed
Stainless steel 304L - 3,500 kg
Storage tanks of 25 m3, with internal agitator. Installation on site.
December 2015
Slide 5

Textile industry
Stainless steel 304 - 7,800 kg
Storage tanks of 30 m3. Test sealing in our workshop and installation on site.
February 2020
Slide 6

Nuclear industry
Stainless steel 304L - 2,530 kg
Manufacturing documentation in compliance with French nuclear industry. Inside surface mirror-polish.
June 2020
Slide 7

Food and Feed
Stainless steel 304L - 1,100 kg
Brushed polishing. Roughness Ra < 1.6 µm.
November 2016
Slide 8

Piping

Piping, as tank fabrication, is one of Stolz Miras historical expertise.

Piping

Our skilled workers, specifically trained for the piping industry, are at the forefront of this type of equipment in Vietnam. They bring a real added value and a guarantee in the sustainability of our customers’ investments.

Slide 1

Pharmaceutical
Stainless steel 316L
Manufacturing of skids inhouse. Installation on site.
November 2016
Slide 2

Water treatment
Stainless steel 304L - 316L
Manufacturing of tanks inhouse. Installation on site of full piping.
January 2016
Slide 3

Water treatment
Stainless steel 304L - 316L
Manufacturing of tanks and skids inhouse. Installation on site.
February 2017
Slide 4

Water treatment
Stainless steel 316L
Manufacturing of tanks and FAT inhouse before installation on site.
April 2018
Slide 5

Pharmaceutical
Stainless steel 304L - 316L
Manufacturing of tanks and skids inhouse. Installation on site.
June 2018
Slide 6

Cement industry
Mild steel - 400 kg
-
June 2020

Pressure equipment

Despite its recent implication in this type of fabrication, Stolz-Miras successfully produces, assembles and tests pressurized equipment for the food, pharmaceutical and chemical industries.

Pressure equipment

Made of steel, stainless steel or specific alloys, Stolz-Miras manufactures pressure equipment thanks to its teams certified for this type of fabrication.

Vacuum / pressure tests can be carried out by our teams under the supervision of our Quality department or via third-party entities according to our customer requirements and specifications.

Slide 1

Pharmaceutical
Stainless steel 316L - 1,100 kg
Double layer body. Assembly and running test in our factory.
March 2019
Slide 2

Chemical
Hastelloy C22 - 35 kg
Inisde roughness Ra < 0.6 µm. Pressure test: + 14 bars.
April 2020

Conveyors - Screws

Endless screws can be used as a conveying or dosing system. Single or double, with or without central tube, single or variable diameter / pitch, made of steel or stainless steel, Stolz-Miras meets all your needs for this kind of fabrication.

Conveyors - Screws

Thanks to a policy of permanent investment, Stolz Miras is able to produce all types of screw conveyors / dosing system whose characteristics are included in the following ranges:

  • Internal diameter: 40 mm min,
  • External diameter: 1,500 mm max,
  • Thickness between 3 and 20 mm,
  •  Screw pitch: 850 mm max.

We also carry out assembly, tests and specific tests (motorization, sealing, etc.).

Slide 1

Food and Feed
Mild steel - 450 kg
Running test before final painting. Assembly and FAT in our workshop.
April 2020
Slide 2

Oil
Stainless steel 304L - 8,500 kg
Screw conveyor with no central shaft. Thickness of spirales: 20 mm.
Assembly and FAT inhouse.
September 2020
Slide 3

Cement industry
Stainless steel 304L - 1,100 kg
Outside brushed polishing. Assembly and FAT inhouse.
November 2020
Slide 4

Tire industry
Mild steel - 3,200 kg
Supply mild steel parts. Assembly and FAT inhouse.
September 2020
Slide 5

Packaging process
Stainless steel 304L - 45 kg
Pushing screws. Roughness Ra < 0.2 µm.
August 2020
Slide 6

Food and Feed
Stainless steel 304L - 330 kg
Brushed polishing. Assembly and FAT inhouse.
December 2020
Slide 7

Food and Feed
Stainless steel 304L - 850 kg
Mirror-polishing (Ra < 0.2 µm).
November 2016
Slide 8

Tire industry
Stainless steel 304L/PEHD - 700 kg
Supply of stainless steel and PEHD parts. Assembly and FAT in our factory.
September 2020
Slide 9

Food and Feed
Mild steel - 350 kg
Assembly of parts from customer and FAT in our factory.
September 2019

Static equipment​

Thanks to its flexibility, Stolz Miras manufactures, assembles and tests all the equipment for your process lines.

Static equipment​

For all the equipment produced in our factory, we can:

  • Assembly with commercial items (bearing, gearmotor, sensors),
  • Execute wiring of different circuits (electrical, pneumatic, hydraulic),
  • Perform the necessary tests for product validation (tightness, operating clearance, motorization, etc.)
Slide 1

Alimentaire
Acier - 2 400 kg
Assemblage des items issus du commerce et FAT dans nos locaux.
Novembre 2020
Slide 2

Alimentaire
Inox 304L - 9 400 kg
Tests finaux avant démontage, nettoyage et emballage.
Janvier 2019
Slide 3

Sidérurgie
Acier / Inox 304L - 1 150 kg
Assemblage des items issus du commerce et FAT dans nos locaux.
Octobre 2016
Slide 4

Alimentaire
Inox 304L - 220 kg
Rugosité intérieure Ra < 0,8 µm. Assemblage dans notre atelier.
Décembre 2020
Slide 5

Energie
Acier - 7 800 kg
"Fourniture parties acier. Assemblage et FAT dans nos locaux."
Avril 2017
Slide 6

Nucléaire
Inox 304L - 320 kg
"Assemblage items de fourniture clients. Dossier Constructeur destiné au nucléaire francais."
Avril 2020

Dynamic equipment

Result of its extensive know-how on mechanics, Stolz-Miras producesand assembles complete machines on behalf of renowned companies.

Dynamic equipment

The experience and working precision gained over the years allow us to produce a wide spectrum of dynamic machines including mechanical, pneumatic and electrical assemblies.

Slide 1

Food and Feed
Inox 304L - 1 200 kg
Leaking test of bottom doors. Pneumatic and motorization system assembly. Mirror-polishing inside (Ra< 0.2 µm).
September 2020
Slide 2

Food and Feed
Acier - 3 740 kg
Pressure test of air tank. Assembly with items from customer and FAT inhouse.
October 2020
Slide 3

Industrie Cimentiere
Acier / Hardox - 5 900 kg
Double layer of body in Hardox. Assembly with items from customer and FAT inhouse.
May 2020
Slide 4

Food and Feed
Inox 304L - 1 900 kg
Gap max. between body and paddle: 1 mm. Inside surface mirror-polished (Ra < 0.2 µm).
August 2020
Slide 5

Food and Feed
Inox 304L - 9 500 kg
Leaking test of bottom doors. Hydraulic and motorization system assembly.
December 2018
Slide 6

Food and Feed
Acier / Inox 304L - 1 900 kg
Body with insulating double layer. Installation and wiring of the heating circuit.
May 2020
Slide 7

Food and Feed
Acier - 2 700 kg
Leaking test of bottom doors. Gap max. between body and rotor: 4 mm.
June 2020
Slide 8

Oil
Acier / Inox 304L - 2 600 kg
All main parts machined on boring equipment to ensure correct fitting during final assembly.
November 2020
Slide 9

Food and Feed
Inox 304L - 2 300 kg
Manufacturing on going. Inside surface mirror-polished (Ra < 0.2 µm).
January 2019
Slide 10

Food and Feed
Acier - 2 300 kg
Assembly with parts from customer and FAT in our workshop.
July 2020
Slide 11

Food and Feed
Inox 304L -2 800 kg
Leaking test of the mahcine. FAT inhouse.
October 2016
Slide 12

Food and Feed
Acier - 1 400 kg
Pressure test of air tank. Assembly and FAT inhouse.
September 2020
Slide 13

Food and Feed
Acier / Inox 304L - 5 900 kg
Body with insulating double layer. Installation and wiring of the heating circuit. FAT inhouse.
December 2019
Slide 14

Food and Feed
Acier - 950 kg
Ribbon rotor: L 3.6 m x Ø 1 m. Gap max. with the body: 4 mm.
May 2020
Slide 15

Food and Feed
Inox 304L - 5 000 kg
Leaking test of bottom doors. Inside surface mirror-polished (Ra < 0.2 µm).
January 2018

Others

Our know-how has been developed through specific projects carried out in partnership with our customers.

Others

Our adaptability results from the desire of our teams to respond to your most diverse projects, from the simplest to the most complex.

We can also make unique machining / mechanical parts for specific needs.

Vos jambes autour de sa taille, vos mains autour de son cou, vous enlevez, et votre bassin est étroitement pressé contre son bassin, vous glissez sur sa bite, de plus près et de plus près de l’orgasme enchanteur. Semble romantique? Donc, il est venu le temps d’essayer ce sexe pose debout de notre “kama https://pharmaciefr24.com/cialis-generique-tadalafil/ Un mais! Votre jeune homme devrait être sous une très bonne forme physique, sinon il ne sera pas capable de vous garder et d’effectuer des frictions puissantes. Au fait, dans cette posture, vous pouvez avoir des relations sexuelles non seulement dans la chambre à coucher, mais aussi dans la cuisine et dans la salle de bain. Ensuite, en tant que support pour les jambes, vous pouvez utiliser un lave-vaisselle ou un lave-linge

Slide 1

Civil engineering
Galvanized steel - 1,900 kg
Machining after welding. Galvanized equipment.
November 2020
Slide 2

Aeronautics
Mild steel - 1,350 kg
Airport equipement. Stolz-Miras design.
November 2020
Slide 3

Food and Feed
Stainless steel 304L - 20 kg
Machining after welding. Mirror-polishing (Ra < 0.2 µm).
March 2018
Slide 4

Pharmaceutical
Machining after welding on universal head boring machine. Chromium coating on critical surfaces.
December 2015
Slide 5

Civil engineering
Machining after welding. Galvanized equipement.
December 2020
Slide 6

Mining industry
Acier galva / Inox 316L - 4 800 kg
Painting after galvanization. Assembly, FAT and inspection by third party inspector in our workshop.
Janvier 2021
Slide 7

Chemical
Stainless steel 316L - 820 kg
Machining paddles and boring process after welding. L: 4,5 m.
July 2020
Slide 8

Packaging process
Stainless steel 304L - 45 kg
Roughness Ra < 1.6 µm and brushed polishing.
March 2020
Slide 9

Civil engineering
Galvanized steel - 13,500 kg
Painting after galvanization.
January 2020
Slide 10

Cement industry
Stainless steel 304L - 2,400 kg
Assembly of parts from customer and FAT in our factory. Glassblasting of upper hopper.
November 2020
Top